BS-HCF006B ABS Truck Front Axle Cover with Spike Lug Nut Cover

Item No.: BS-HCF006B

Material: Plastic ABS

Height: 110mm

PCD: 10*285.75mm

Fits most 20 inch, 22.5 inch and 24.5 inch wheels with 10 lug holes;

Removable cap to check hubometer, oil seal and level of axle;

Each set contains 10 lug nut covers, 1 high hat and 1 clear plastic rim protector.

STUD-PILOTED

Removable caps-Many of our rear wheel products feature a removable cap,allowing easy access to the hub for maintenance.

Lug Holes-There are usually 10 lug holes located around the perimeter of the beauty ring.For stud-piloted applications,there are five tapered holes and five flat holes that slip over existing lug nuts.

1.5'' Lug Nuts-Most stud-piloted wheels use a 1.5'' lug nut,with a conical face that helps center the wheel as it is tightened.Products designed to attach using these lug nuts feature a tapered opening to accommodate the conical face of the lug nut.

HUB-PILOTED

Removable caps-Many of our rear wheel products feature a removable cap,allowing easy access to the hub for maintenance.

Lug Holes-There are usually 10 lug holes located around the perimeter of the beauty ring.For hub-piloted applications,there are five flat holes and five flat holes that slip over existing lug nuts.As with all our wheel products,it is only necessary to remove five of the lug nuts for proper installation.

33MM Lug Nuts-Most hub-piloted wheels use a 33mm lug nut,with a flat face.The lug nuts usually incorporate an integral washer at the base.