BS-FR-202G Black Complete Bumper,PP Plastic,  With Fog Lamp Hole for Freightliner Cascadia 2017+

Product description
Manufactured from top quality components, this is your best option and inexpensive replacement for you rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.

Fitment 
Freightliner Cascadia 2017+

Feature
100% Brand New. 
Make from premium quality materials to provide the best.
Improving both performance and safety.
Direct Aftermarket replacement, Easy to install. 

How to install the bumper？

I. Tools Preparation

Common tools: Socket wrench, impact wrench, torque wrench, screwdriver, jack or support frame

II. Removing the Old Bumper

First, turn off the vehicle's power to avoid short circuits when disconnecting the light wiring.

If the bumper has fog lights or LED lights, disconnect the wiring harness first.

There are usually 6-10 fixing bolts under the bumper and on the chassis that need to be removed.

Two people should lift the old bumper together to avoid scratching the vehicle body.

III. Installing the New Bumper

Installing the center bumper: First, align the center section with the mounting holes on the chassis.

Tighten the bolts, but do not fully tighten them: Tighten them lightly first to facilitate later adjustment.

Installing the left and right corners: Install the left and right corners onto the sides of the center bumper.

Aligning gaps: Adjust the distance between the bumper and the headlights, and the distance between the bumper and the front grille.

IV. Final Fixing

Tighten all bolts with a torque wrench.

Reconnect the fog lights/LED lights.

Check the installation effect to ensure that the gaps are even, there is no looseness, and the lights are working properly.