BS-KW-204-1 Front Bumper Cover ,PP Plastic,Compatible with 2017- Kenworth T680 W/Fog Light Hole

Fitment: Front Bumper Cover is compatible with 2017- Kenworth T680. Please confirm your vehicle model before purchasing

Feature: Front Bumper Cover is made of durable PP and ABS plastic and the color is matte black & gloss black. The material of this front bumper cover is hard-wearing, not easily damaged and can withstand a certain degree of impact

Enhance Function: Designed to absorb and disperse crash energy, reduce the impact force on the passenger compartment and lowering the risk of damage to passengers and drivers

Installation: Directly replace the broken or old bumper cover, it is easy to install. Professional installation is also recommended

How to install the bumper？

I. Tools Preparation

Common tools: Socket wrench, impact wrench, torque wrench, screwdriver, jack or support frame

II. Removing the Old Bumper

First, turn off the vehicle's power to avoid short circuits when disconnecting the light wiring.

If the bumper has fog lights or LED lights, disconnect the wiring harness first.

There are usually 6-10 fixing bolts under the bumper and on the chassis that need to be removed.

Two people should lift the old bumper together to avoid scratching the vehicle body.

III. Installing the New Bumper

Installing the center bumper: First, align the center section with the mounting holes on the chassis.

Tighten the bolts, but do not fully tighten them: Tighten them lightly first to facilitate later adjustment.

Installing the left and right corners: Install the left and right corners onto the sides of the center bumper.

Aligning gaps: Adjust the distance between the bumper and the headlights, and the distance between the bumper and the front grille.

IV. Final Fixing

Tighten all bolts with a torque wrench.

Reconnect the fog lights/LED lights.

Check the installation effect to ensure that the gaps are even, there is no looseness, and the lights are working properly.